Ethernet on Technosoft drives

1	Ethernet to RS232 adapter setting in Windows XP, Windows 7 or later This article refers to the "P038.001.E007 - RS232 to Ethernet adapter" To connect a Technosoft drive to the PC through the Ethernet-to-RS232 adapter, the IP of the adapter has to be configured first. The IP can be the default one (if the adapter is connected…
2	How to access the Ethernet to RS-232 adapter from a PC which is not in the same LAN as the adapter [II] To access the Ethernet / RS-232 Adapter from a remote PC (which is not in the same LAN as the Ethernet / RS-232 Adapter), the server’s (or router’s) port forwarding must be set to allow communication. The port numbers that must be forwarded are UDP/TCP:…